Lincoln Electric WELD-PAK 125HD K2513-1 is a compact wire-feed welder for self-shielded flux-cored welding in home workshops, farm maintenance and light fabrication. Its 120 V input and 30–125 A output range identify this configuration.
Key Features and Benefits
- Two adjustment knobs provide direct control of wire speed and voltage.
- Self-shielded flux-cored operation uses the specified wire without an external shielding-gas supply.
- The listed gun and work connection support the documented base configuration.
- The model-specific input and output ratings help match the machine to the available circuit and work.
Technical Specifications
| Specification | Details |
|---|---|
| Model / manufacturer part number | K2513-1 |
| Processes | self-shielded flux-cored welding |
| Input power | 120 V, single-phase, 60 Hz |
| Output range | 30–125 A |
Applications and Compatibility
For the shop, farm and repair applications identified by the manufacturer. Choose wire diameter, gas and polarity for the exact process; a different model in the same family can require different input power and accessories.
What Is Included
- (1) Magnum® 100L gun and 10 ft. (3.0 m) cable assembly with brass gun connection and 4-pin MS-Type connection for trigger control (K530-6)
- (3) .035 in. (0.9 mm) contact tips (KH712)
- (1) Gasless nozzle for Innershield® welding (KH726)
- (1) Wire spindle adapter for 8 in. (203 mm) diameter spools (KH720)
- (1) .025 - .035 in. (0.6 - 0.9 mm) wire diameter dual track drive roll for flux-cored welding (KP2948-1)
- (1) Sample spool of .035 in. (0.9 mm) diameter Innershield® NR®-211-MP flux-cored wire
- (1) Work clamp and 10 ft. (3.0 m) cable
- How To MIG Weld DVD
- Instruction manual
Setup and Documentation
Check the exact machine code and nameplate before installation. Have the electrical supply and protective devices selected according to the operator instructions. Match the process, polarity, consumables and shielding gas to the welding procedure. Maximum output is not a continuous-duty rating; follow the stated duty cycle and allow the required cooling time. The relevant manufacturer document is available in Downloads & Documents.
Frequently Asked Questions
What input power does this model require?
120 V, single-phase, 60 Hz. Follow the machine nameplate and installation instructions.
Is this a gas-shielded MIG package?
The documented 125HD package is set up for self-shielded flux-cored welding. Do not substitute the capabilities of the 140HD or 180HD.
Is maximum output available continuously?
No. Compare rated amperage, voltage and duty cycle together. Maximum range and rated continuous operation are different specifications.